|
Quantity
|
Out of stock
|
||
|
|
|||
AGM multi-gel battery
External universal battery, manufactured using AGM multi-gel technology - a completely sealed external power source that does not require maintenance during storage and operation.
The technology for manufacturing universal external AGM batteries (Absorbent Glass Mat) implies the presence of an absorbent fiberglass pad inside the battery. Batteries of this type cope well with increased loads.
The main feature of the SILVER battery is the use of silver alloying technology. The plates located inside the battery are protected from corrosion processes, in addition, the presence of silver significantly improves the gas recombination mechanism. SILVER batteries from LogicPower, compared to conventional multi-gel batteries, have an increased battery life and starting current by 15%.
Advantages of a multi-gel AGM battery:
- The resource of charge/discharge cycles for a multi-gel battery is 1000* (on average 6-7 years, depending on operating conditions).
- The battery can be installed in residential premises. The absence of free liquid electrolyte between the plates and the complete tightness of the case eliminate acid leaks and guarantee the absence of harmful fumes.
- These batteries show stable results in practical use when operating in low (-20°C) and high (+50°C) ambient temperatures.
- In operation, a multi-gel AGM battery can withstand long-term discharge, cyclic discharge, deep discharge and high-current discharge.
- Batteries of this type have low self-discharge rates during long-term storage and reliable self-protection against overdischarge and overcharging of the battery.
Features of the production of multi-gel AGM batteries
Multi-gel batteries are manufactured using advanced AGM technology using thickened plates with high anti-corrosion properties.
Inside The battery is equipped with porous insulating gaskets made of thin fiberglass. The separators and electrode plates are pressed tightly against each other. Thus, there is no free liquid electrolyte between the battery plates, since it is contained in the separator and in the active part of the electrodes.
The amount of liquid electrolyte is dosed in such a way that small pores are filled with acid, and large ones ensure gas circulation.
The design of the multi-gel battery has an improved gas recombination system - oxygen and hydrogen formed as a result of chemical processes do not have time to evaporate outside the sealed housing before condensation.
Application areas: what is an AGM (multi-gel) battery for?
A universal external charging battery is used:
- In telecommunications and other communication systems, including as an external battery for charging mobile phones, radios, etc.
- For equipping video surveillance systems, security, security, fire and other alarms.
- In uninterruptible power supply systems for server stations.
- As a power source for medical, laboratory, commercial and other specialized equipment.
- In energy storage systems from alternative sources (batteries for solar panels).
- As a battery for an emergency or LED lamp.
- As batteries for power units uninterruptible power supply and UPS.
Which batteries are suitable for emergency lighting systems in Ukraine, and which battery to buy for an uninterruptible power supply?
The choice of battery depends on the power of the connected power consumers, as well as on the required battery life of electrical equipment.
An external AGM (multi-gel) battery for a UPS should have sufficient capacity, a wide range of operating temperatures and a long service life.
Before deciding which battery is best to buy for a UPS, carefully study the parameters of the uninterruptible power supply and determine the amount of time required for autonomous operation of electrical equipment.
Multi-gel batteries are in high demand among consumers who want to buy an inexpensive and universal battery for a heating boiler, emergency lighting systems or autonomous water supply.
How to avoid losing battery capacity in conditions frequent power outages?
Two important rules for caring for batteries AGM, GEL, MG:
- You should not often discharge the battery more than 30% of its capacity (take this into account when calculating the battery capacity)
- After discharging, the battery must be fully charged with a current of 1/10 of the capacity within 10 hours
IMPORTANT! If a group of several batteries connected in parallel or series is used, then:
- all batteries must have the same capacity,
- be of the same type AGM, GEL or MG,
- have the same voltage, the same number of charge/discharge cycles,
- be from the same batch of the same brand.
On the official LogicPower website you can order batteries for UPS and other types of batteries with delivery across Ukraine. Price - directly from the manufacturer.
Warranty - 24 months.
The company ensures 100% fulfillment of warranty obligations. Technical maintenance and repair of LogicPower equipment is carried out in certified service centers.