Controller EPsolar(EPEVER) Tracer 1210A MPPT 10A 12/24V

MPPT 10A 12/24V controller, Tracer-1210A is an advanced maximum power point search (MPPT) controller for off-grid solar systems. The controller provides the highest efficiency, more than 98%, minimum power loss. MPPT is the main topology in low cost conversion circuits implemented on a microprocessor to intelligently adjust the set point of solar panels, allowing the solar panels to develop maximum power. When the conditions change, the solar panel operating point deviate from the maximum power point, the microprocessor will adjust the solar panel operating point based on the MPPT calculation to extract the maximum possible power from the solar panels. Compared with PWM controllers, MPPT controller can increase the output power of solar panels by 5%~30%. The increase in power output depends on factors such as the characteristics of the solar panels, environmental conditions and lighting levels. This controller has 4 modes of operation 1. Controller for lighting - set the glow time after dark (Timer1) and before dawn (Timer2), from 1 to 15 hours. 2. Controller for lighting - turning on the glow after 10 minutes. after dark until dawn. 3. The controller is in manual mode (turning on the power supply of the load with the button). 4. Test load mode - turning on the load after it got dark and turning it off at dawn without delay. Choice of 4 battery types 1. Filler batteries 2.AGM 3.GEL 4. User-defined parameters (voltage range for settings 9-17V). Configurable using the remote control MT-50 or via a computer using a special. software.